Filter
Top Products
Rotary Lawnmower Owners Manual
Safety
Operation
Assembly
Maintenance
Model No. M46
WARNING • PLEASE READ
For your own safety please read this manual before attempting to operate your new unit.
Failure to follow instructions can result in serious personal injury. Spend a few moments to
familiarize yourself with your mower before each use.
9096-305209
Model No. M46
AU
15
BLADES
Check the blade mounting bolts at frequent intervals for proper tightness.
Check the blade condition frequently, particularly if the mower has hit a foreign object or is vibrating.
Sub-standard cutting and catching will result from a neglected blade. Your Authorised Dealer can
replace blades as necessary, or if you prefer, supply the parts for you to do yourself.
BLADE CHANGE
1. Disconnect the spark plug wire.
2. Adjust the mower to the high cut position.
3. Lift the rear flap and prop open to give full access to the blades.
4. Remove the blades, blade retaining bolts, nuts and washers and discard.
5. Fit the new blades, blade bolts, washers and nuts
in set sequence, refer drawing below (to loosen
rotate anti-clockwise, to tighten rotate clockwise).
Blade bolt torque : 14.8-22.0 ft-lb (20-30 N•m)
CAUTION
Always use genuine original equipment parts to ensure safety and proper
performance. Substitute parts can be disappointing and dangerous.
AU
Check the blade mounting bolts at frequent intervals for proper tightness.
Check the blade condition frequently, particularly if the mower has hit a foreign object or is
vibrating. Sub-standard cutting and catching will result from a neglected blade. Your
Authorised Dealer can replace blades as necessary, or if you prefer, supply the parts for you
to do yourself.
BLADE CHANGE
1. Disconnect the spark plug wire.
2. Adjust the mower to the high cut position.
3. Lift the rear flap and prop open to give full access to the blades, use only Talon blade kit
number 5223722-01.
4. Remove the blades, blade retaining bolts, nuts and washers and discard.
5. Fit the new blades, blade bolts, washers and nuts
in set sequence, refer drawing below (to loosen
rotate anti-clockwise, to tighten rotate clockwise).
Blade bolt torque : 14.8-22.0 ft-lb (20-30 N•m)
Fig. 9A
Fig. 9B
BLADES
CAUTION
Always use genuine original equipment parts to ensure safety and proper
performance. Substitute parts can be disappointing and dangerous.
15