Filter
Top Products
14
CAUTION: It is imp ortant to prevent
gum deposits from forming in essential fuel
system parts such asthe carburetor ,fuelfil-
ter,fuelhose,orfuel tankduringstorage.Al-
cohol blendedfuels (calledgasoholor using
ethanol or methanol) can attract moisture
which leads to fuel mixture separation and
formationofacidsduringstorage.Acidic gas
can damage the engine.
TROUBLE CAUSE REMEDY
Engine will not
start or will run
only a few
seconds after
starting.
1. Ignition switch off.
2. Engine flood ed.
3. Fuel tank empty .
4. Spark plug not firing.
5. Fuel notreaching
carburetor.
1. Move ignition switch to O N.
2. See “Difficult Starting” in
Operation Section.
3. Fill tank with correct fuel mixture.
4. Install new spark plug.
5. Check for dirty fuel filter; replace.
Check for kinked or split fuel line;
repair or replace.
Engine will
not idle
properly.
1. Idle speed requires
adjustment.
2. Carburetor requires
adjustment.
1. See “Carburetor Adjustment” in the
Service and Adjustments Section.
2. Contact an author ized service dealer.
1. Air filter dirty.
2. Spark plug fouled.
3. Chain brake engaged.
4. Carburetor requires
adjustment.
Engine will not
accelerate,
lacks power,
or dies under
a load.
1. Clean or replace air filter.
2. Clean or replace plug and r egap.
3. Disengage chain brake.
4. Contact an authorized service dealer.
Engine
smokes
excessively.
1. Too much oil mixed with
gasoline.
1. Empty fuel tank and refill with
correct fuel m ixture.
WARNING: Always stopunit anddisconnect spark plug before performing allof
therecommendedremediesbelowexceptremedies thatrequireoperationoftheunit.
TROUBLESH OOTING TABLE
Chain moves
at idle speed.
1. Idle speed requires
adjustment.
2. Clutch requires repair.
1. See “Carburetor Adjustment” i n the
Service and Adjustments Section.
2. Contact an authorized service dealer.
DECLARA TION OF CONFORMITY
EC Declaration of Conformity (Only applies to E urope)
We, Husqvarna Outdoor Products Italia, S.p.A., Valmadrera, Italy. Tel:
+39--0341--203211, declare that the chain saw models McCulloch M3414 and M3616
CSI --- AV from serial numbers 2008--040(N or D) 00001 and onwards (the year is clearly
stated on the rating plat e, follow ed by theserial number), comply with the requirements of
the COUNCIL’S DIRECTIVES:
of 22 June 1998 “relating to machinery” 98/37/EC, annex IIA;
of 3 May 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable
supplements; and
of8May2000“relatingtothenoisee missionsintheenvironment”inaccordancewithAnnex
Vof2000/14/EC. The measured sound power is 110 dB(A), the guar anteed sound power
is 118 dB(A) and the net power is 1,2 kW or 1,4 kW.
The following standards have been applied: ISO 11681--1:2004, EN/ISO 12100--1:2003,
EN/ISO 12100--2:2003, and CISPR 12:2001.
Notifiedbody,0404the SwedishMachineryTestingInstitute,Fyrisborgsgatan 3S--754
50 Uppsala, Sweden, has carried out EC type approval. The certificate(s) is numbered:
404/96/400.
The supplied Chain Saw conforms with the sample that un derwent the EC t ype approval.
08--02--09
Michael S. Bounds, Director
Product Safety and Standards
Handheld Consumer Products