Filter
Top Products
4
Assembly instructions
F
1
To Remove Debris Bag From Product (F)
1. Gently press bag latch (F1) down. See fig F.
2. Lower handle of bag frame away from product.
3. Move bag frame forward.
Fitting the Handle Bolt (G)
1. Place handle bolt into the location slot on the
product and slide into place.(G).
2. Repeat on the other side.
Fitting the Handle (H)
1. Locate handle onto handle bolts on each side
of the product.
2. Secure handle by turning handle knobs clock-
wise. (H)
3. The handle can be adjusted by turning handle
knobs 3 full turns anti-clockwise, moving han-
dle to position required and re-securing handle
as described in 2.
Fitting The Shoulder Harness (J) & (K).
1. Thread strap through the slots in the
handle.(J)
2. Thread strap through the buckle. See fig J.
Adjust as required to ensure the shoulder har-
ness is in the most comfortable position. See
fig. K.
J
K
G
H
Buckle