Filter
Top Products
ASSEMBLY
CAUTION
:
Always be sure that the battery cartridge
is
I
0
Remove the wing bolt from the motor
housing. Insert the shaft into the motor
housing, align the hole in the shaft with
the hole in the motor housing. Replace
the wing bolt and tighten
it
securely.
.Remove the wing bolt from the grip.
Insert the shaft into the grip, align the
hole in the shaft with the hole in the
grip. Replace the wing bolt and tighten
it
securely.
.Slide the guard ring on the safety guard
into the position shown in the figure and
push the safety guard into the slot in the
motor housing.
removed before assembling the trimmer.
f
I
/
Wing
bolt
Fig.
1
I
I
/
Safety
guard
I
I
I
I
Fig.
3
5