Filter
Top Products
8
When installing the lower blade onto the yoke, the lower blade should be
pressed against the yoke so as to be contacting the bevelled portions A and B
of the yoke and the tip C of the lower blade positioning screw while you tighten
the lower blade securing bolt. There must be no clearance between A, B and
C during installation.
NOTE:
• The lower blade positioning screw is factory-assembled. Do not tamper
with it.
OPERATION
Holding material
The materials for cutting should be fastened to the workbench by means of
workholders.
Shearing method
Keep the shear moving parallel with the material.
1. Lower blade
2. Tighten
3. Yoke
1. Yoke
2. Lower blade positioning screw
3. Lower blade
1
2
3
004686
1
2
3
A
B
C
004687
1. Workholder
1
004699
004701