Filter
Top Products
7
Some tools have one or more thin washers between the upper blade and the
blade holder. Be sure to use the same number of thin washers when reassem-
bling.
NOTE:
• No thin washers are used for the lower blade.
Install the upper blade and tighten the upper blade securing bolt with the hex
wrench. Press up on the upper blade while tightening it.
After securing the upper blade, be sure that there is no gap left between the
upper blade and the bevelled surface of the blade holder.
1. Thin washers
2. Blade holder
3. Upper blade
4. Upper blade securing bolt
1
23
4
004680
1. Tighten
2. Upper blade securing bolt
3. Upper blade
1
2
3
004681
1. Blade holder
2. Upper blade securing bolt
3. Upper blade
4. No gap allowed
1
2
3
4
004683