ENGLISHFRANÇAISEESPAÑOL
If it is determined by an authorized warranty station that other engine components have been
damaged due to the failure of a warranted emission-related part during the warranty period,
MAKITA will repair and/or replace the necessary components.
WHAT IS NOT COVERED UNDER THIS WARRANTY
This warranty does not cover any emission-related part which malfunctions, fails, or is dam-
aged due to alterations and/or modifications such as changing, adding, or removing parts.
When an engine is being serviced under warranty, MAKITA and any of its authorized dealers,
distributors, or warranty stations shall not be liable for any loss of use of the engine, for any
damage to goods, or loss of time or inconvenience. This limited warranty also does not apply
to any emission-related part which malfunctions, fails, or is damaged due to failure to follow
the maintenance and operating instructions specified in the 2005 and later Owner's Manual
including.
(a) Improper or inadequate maintenance of any warranted emission-related part.
(b) Improper installation, adjustment, or repair of the engine or any warranted emission-
related part unless performed by a factory authorized warranty station.
(c) Failure to use recommended fuel as specified in the 2005 and later Owner's Manual.
(d) Repairs and diagnosis performed outside of an authorized warranty station.
(e) Use of parts which are not authorized by MAKITA.
MAINTENANCE SCHEDULE
The engine owner is responsible for having all scheduled inspection and maintenance services
performed at the intervals specified in the 2005 and later Owner's Manual and to retain records
of these services as having been performed. These records should be transferred to each sub-
sequent owner of the engine. MAKITA cannot deny a claim solely because there are no
records of scheduled maintenance, however, a warranty claim may be denied if the failure to
perform the scheduled maintenance and inspection resulted in the failure of a warranted emis-
sion-related part.
As a minimum, the engine owner is responsible for the scheduled inspection and maintenance
described below which are based on the procedures described in the Owner's Manual.
PROCEDURE INTERVAL
1) Change engine oil : Initial 20 hours and every 100 hours afterward
2) Clean air cleaner (element) : Every 50 hours
3) Replace air cleaner element : Every 200 hours
4) Clean and adjust spark plug and electrodes : Every 200 hours
Note: More frequent maintenance may be necessary under dusty, dirty or severe conditions.