Makita EG301A Portable Generator User Manual


 
18
(2) DC APPLICATION
(Only for charging 12 volt battery)
DC receptacle (Only for charging 12 volt
battery)
For charging 12 voltage battery, 12V-8.3A
(100W) of maximum AC power can be
taken out from the DC receptacle by
means of the exclusive DC cable.
The exclusive DC cable is come with your
generator set (included in the package).
DC Circuit Breaker
DC circuit breaker is turned off to shut down the DC power, when the DC is over
the usage range or the battery is defective.
Check the generator and/or battery for overloading or defect, and turn on the DC
circuit breaker after no problem and defect are found out.
Connection of exclusive DC cable :
Connect positive (red) clip of DC cable to positive (+) terminal on battery.
Connect negative (black) clip of DC cable to negative (-) terminal on battery.
-
+
BLACK
CABLE
RED
CABLE
DC receptacle