8
Transport and storage
- When changing your location during work switch off the chain
saw and actuate the chain brake in order to prevent an inadvert-
ent start of the chain.
- Never carry or transport the chain saw with the chain running.
- When transporting the chain saw over long distances the guide
bar protection cover (delivered with the chain saw) must be
applied.
- Carry the chain saw with the tubular handle. The guide bar
points backwards (20). Avoid coming in contact with the muffl er
(danger of burns).
- Ensure safe positioning of the chain saw during car trans portation
to avoid fuel or chain oil leakage.
- Store the chain saw safely in a dry place. It must not be stored
outdoors. Keep the chain saw away from children.
- Before storing the chain saw over a long period of time or ship-
ping it the fuel and oil tanks must be completely emptied.
Maintenance
- Before performing maintenance work switch off the chain
saw (21) and pull out the plug cap.
- Before starting work always check the operating safety of the
chain saw, in particular the function of the chain brake. Make
sure the saw chain is properly sharpened and tensioned (22).
- Operate the chain saw only at a low noise and emission level.
For this ensure the carburetor is adjusted correctly.
- Regularly clean the chain saw.
- Regularly check the tank cap for tightness.
Observe the accident prevention instructions issued by trade
associations and insurance companies. Do not perform any
modifi cations on the chain saw. You will put your safety at
risk.
Perform only the maintenance and repair works described in
the instruction manual. All other work must be carried out by
MAKITA Service.
Use only original MAKITA spare parts and accessories.
Using spare parts other than original MAKITA parts or acceso-
ries and guide bar/chain combinations or lengths which are not
approved bring a high risk of accidents. We cannot accept any
responsibility for accidents and damage resulting from using
sawing devices or accesories which have not been approved.
First aid
For the event of a possible accident, please make sure that a
fi rst aid kit is always immediately available close by. Immediately
replace any items used from the fi rst aid box.
When calling for help, give the following information:
- Place of the accident
- What happened
- Number of injured people
- Kind of injuries
- Your name!
NOTE
Individuals with poor circulation who are exposed to excessive
vibration may experience injury to blood vessels or the nervous
system.
Vibration may cause the following symptoms to occur in the fi ngers,
hands or wrists: ”Falling asleep” (numbness), tingling, pain, stabbing
sensation, alteration of skin colour or of the skin. If any of these
symptoms occur, see a physician!
20
21
24
22
SERVICE
23