Filter
Top Products
P 3/ 9
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Shear Blade Assembly, Gear Complete (cont.)
DISASSEMBLING
M5x25
Pan head screws (2pcs.)
with Sleeves 5 in the holes
4. Remove Gear complete by tapping
the specific part of Gear housing
complete with plastic hammer as
drawn below.
5. Remove 2 pcs. of Ball bearing
608ZZ from the both sides of
Gear complete.
6. Remove 2 pcs. of
Flat washer 8 from
the both sides of
Gear complete.
3. Loosen two M5x25 Pan head screws and separate Shear blade assembly from the machine.
Note: The screws remain in the holes of Shear blade assembly to hold Sleeves 5 in the blade,
if the same blade is reassembled to the machine.
M5x25 Pan head screws (2pcs.)
with Sleeves 5 in the holes
Shear blade
assembly
Fig. 3
Fig. 4
1R269
Ball bearing 608ZZ
Flat washer 8
(2) Disassemble Gear complete. (Fig.4)
Crank side Reverse side