Filter
Top Products
7
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Adjusting the depth of cut
Loosen the wing bolt on the depth guide and move the base
up or down. At the desired depth of cut, secure the base by
tightening the wing bolt.
securing safety guard
The safety guard can be adjusted about 80 degrees, after
you loosen the wing nut. Adjust to the desired angle, then
secure the wing nut.
Switch action
CAUTION:
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the “OFF”
position when released.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
1. Depth guide
2. Wing bolt
3. Cutting depth
4. Base
1
2
3
4
003511
1. Wing nut
2. Safety guard
1
2
003518
1. Switch trigger
1
003524