Filter
Top Products
Straight guide
The straight guide
is
effectively used for
straight cuts when chamfering or grooving.
Attach the guide plate to the straight guide
with the bolt, the wave washer, the flat
washer and the wing nut.
Loosen the wing bolts and secure the tool
base horizontally. Attach the straight guide
with the clamp screw (A). Loosen the wing
nut on the straight guide and adjust the
distance between the bit and the straight
guide. At the desired distance, tighten the
wing nut securely.
Flat washer
I
Wave
washer
U
When cutting, move the tool with the straight guide flush with the side of the workpiece.
8