Filter
Top Products
17
Section 4: Maintenance and Lubrication
7/03/07
RTA2064, RTA2072, RTR2064 & RTR2072 Rotary Tillers 311-328M
Land Pride
Table of Contents
Storage
At the end of the working season or when the tiller will not
be used for a long period, it is good practice to clean off
any dirt or grease that may have accumulated on any of
the moving parts.
Check the tines for wear and replace if necessary. See
Tine Replacement earlier in this section.
Inspect the tiller for loose, damaged or worn parts and
adjust or replace if needed.
Lubricate as noted in Lubrication starting on page 18.
Repaint parts where paint isworn or scratched to prevent
rust.
Drain gearbox and chaincase oil. Drain oil in gearbox by
removing the bottom drain plug or right hand cap. Drain
oil in chaincase by removing the bottom plug and tipping
tiller backwards. Be sure to refill gearbox and chaincase
at this time.
Store tiller in a clean, dry place.