Filter
Top Products
P/N 488M
P/N 4043
DON’T FUEL, REFUEL,
OR CHECK FUEL WHILE
SMOKING, OR NEAR AN
OPEN FLAME OR
OTHER IGNITION
SOURCE.
MIX UNLEADED GAS
WITH 2 CYCLE 50:1
OIL.
INCORRECT ASSEMBLY.CAUTION: WHEN ASSEMBLING
THE HANDLES, MAKE SURE
FUEL TANK FACES OPERATOR.
THIS IS THE REAR OF THE
TILLER, REFER TO ASSEMBLY
INSTRUCTION ON PAGE 7.
CUTTING HAZARD; KEEP
FEET AND HANDS AWAY
FROM ROTATING TINES.
WEAR EAR AND EYE
PROTECTION.
READ OWNER’S MANUAL
BEFORE USING TILLER, OR
PERFORMING ANY REPAIR
OR MAINTENANCE. KEEP
OWNERS MANUAL IN A
SAFE PLACE.
DO NOT CARRY THE
TILLER IN THIS
POSITION.
IV. Warnings - Do’s
Read and understand the
owner’s manual. Pay
particular attention to all
sections regarding safety.
1. Always keep a firm grip on
both handles while the tines are
moving and/or the engine is running.
BE AWARE!! The tines may coast
after throttle trigger is released. Make
sure tines have come to a complete
stop and engine is off before letting
go of the tiller.
2. Always maintain a firm footing
and good balance. Do not overreach
while operating the tiller. Before you
start to use the tiller check the work
area for obstacles that might cause
you to lose your footing, balance or
control of the machine.
3. Thoroughly inspect the area
where equipment is to be used and
remove all objects, which can be
thrown by the machine.
4. Always keep area clear of
children, pets, and bystanders.
5. Always stay alert. Watch what
you are doing and use common
sense. Do not operate unit when
fatigued.
6. Always dress properly. Do not
wear loose clothing or jewelry, they
might get caught in moving parts.
Use sturdy gloves. Gloves reduce the
transmission of vibration to your
hands. Prolonged exposure to
vibration can cause numbness and
other ailments.
7. While working, always wear
substantial footwear and long
trousers. Do not operate the
equipment when barefoot or wearing
open sandals.
8. Always wear ear and eye
protection. Eye protection must meet
ANSI Z 87.1. To avoid hearing
damage, we recommend hearing
protection be worn whenever using
the equipment.
9. To reduce fire hazard, keep the
engine, and petrol/gas storage area
free of vegetative material and
excessive grease.
10. Start the engine carefully,
according to the manufacturer’s
instructions and with feet well away
from tool(s).
11. Keep all nuts, bolts and screws
tight to be sure the equipment is in
safe working condition.
12. Use extreme caution when
reversing or pulling the machine
towards you.
13. Work only in daylight or good
artificial light.
14. Always be sure of your footing
on slopes.
15. Exercise extreme caution
when changing direction on slopes.
16. Always keep a safe distance
between two or more people when
working together.
17. Always inspect your unit
before each use and ensure that all
handles, guards and fasteners are
secure, operating, and in place.
18. Always maintain and examine
your Tiller with care. Follow
maintenance instructions given in
manual.
19. Always store tiller in a
sheltered area (a dry place), not
accessible to children. The tiller as
well as fuel should not be stored in a
house.
WARNING • DANGER
IF THE TILLER IS USED IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT FOLLOWED,
THE USERS RISK SERIOUS INJURY TO THEMSELVES AND OTHERS.
READ AND UNDERSTAND THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS TILLER.
! !
IMPORTANT ENGINE INFORMATION:
ENGINE FAMILY: SEH024UB24RD
DISPLACEMENT: 21.2cc
THIS ENGINE MEETS U.S.EPA PHI AND 1995-
1998 CALIFORNIA EMISSION REGULATIONS
FOR ULGE ENGINES. REFER TO OWNER’S
MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS
KIORITZ CORP. A98
▲▲▲
EMISSION CONTROL --
The emission control
system for this
engine is EM
(Engine Modification).
Emission Control Label
located on Engine.
EXAMPLE ONLY,
information on label
varies by FAMILY).
An important part of the safety system incorporated in this tiller are
the warning and information decals found on various parts of the tiller.
These decals must be replaced in time due to abrasion, etc. It is your responsibility
to replace these decals when they become hard to read. The location and part
numbers (P/N) of these decals are illustrated on Page 27.
III. Safety Decal Information
4