Filter
Top Products
8
3329-170
Operation
Starting the Engine
1. Firmly push in the
primer 3 times with your
thumb, holding the
primer in for a second
before releasing it each
time.
Note: If the air
temperature is below
55
°
F (13
°
C), firmly push
the primer in 5 times.
m-5572
2. Hold the blade
control bar (A) against
the handle.
A
m-5644
3. Start the engine using either the ignition key
(model 10357 only) or the recoil starter.
or
m-5592a
m-5645
4. If the mower does not start in 1 or 2 pulls, press
the primer button 1 or 2 times and try starting it again.
Using the Self-propel Drive
To operate the self-propel drive, squeeze the
self-propel drive bar (A) toward the handle and hold it.
m-5660
A
To disengage the self-propel drive, release the
self-propel drive bar.
Note: The maximum self-propel ground speed is
fixed. To reduce the ground speed, increase the
space between the self-propel drive bar and the
handle.
Stopping the Engine
To stop the engine, release the blade control bar.
Important: When you release the blade control bar,
both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact your Authorized
Service Dealer.
m-5656