Filter
Top Products
5
6/26/02
SPS20 & SPS30 Series Pulverizer Seeders 313-242M
Introduction
Land Pride
Owner Assistance
The Warranty Registration card should be filled out by the
dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the implement.
The parts on your Pulverizer Seeder have been specially
designed and should only be replaced with genuine Land
Pride parts. Therefore, should your pulverizer require
replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and
model number when ordering parts from your Land Pride
dealer. Be sure to include your serial and model numbers in
correspondence also. Refer to Figure 1 for the location of
your serial number plate.
Further Assistance
Your dealer wants you to be satisfied with your new
pulverizer. If for any reason you do not understand any
part of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS 67402-5060
Serial Number Plate Location
Figure 1
18493
Introduction
Land Pride welcomes you to the growing family of new
product owners.
This pulverizer seeder has been designed with care and
built by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this pulverizer
seeder.
Application
The SPS2048 and SPS3072 Pulverizer Seeders are
designed and built by Land Pride to efficiently do the tasks
of seedbed preparation and precision seeding. Both the
48" model and the 72" models are adapted for Category I
3-point hitch mounting. Seed metering is driven off of the
rear mounted pulverizer roller making the metering rate
directly proportional to forwardground speed and distance
traveled.
Front mounted scarifier shanks open and loosen the soil,
while seed cups drop the seed directly into the cultivated
soil behind the scarifier shanks. The rear pulverizer roller
immediately breaks up unwanted clods, levels the ground,
and presses the seed into firm contact with the soil. When
soil conditions are right, this can often be done in one
highly efficient pass.
The Land Pride SPS2048 and SPS3072 Pulverizer
Seeders are well suited for use by professional
landscapers and rental yards. They have applications on
sod farms, transportation right-of-ways, golf courses, park
systems, athletic fields, construction sites, and housing
developments. See “Features and Benefits”,
“Section 6” for additional information.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual contact your
authorized dealer. Manuals can also be downloaded,
free-of-charge from our website at www.landpride.com
or printed from the Land Pride Service & Support Center
by your dealer.
Terminology
"Right" or "Left" as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
NOTE: A special point of information that the operator
must be aware of before continuing.
IMPORTANT: A special point of information related to
its preceding topic. Land Pride’s intention is that this
information should be read and noted before
continuing.