Filter
Top Products
4
Manual No. 701-157M 06/26/07
Land Pride
Assembly Instructions
■
Block Straps (#2), secure with the supplied 1/2"x 1 1/2
bolt (#3) and the 1/2"center lock nut (#4). Do not over
tighten. The Cable Pulley (#1) should be able to move
freely. See below.
Thread the winch cable under the Cable Pulley (#1) as
shown in the picture below.
Position the Snatch Block assembly over one of the
holes on the blade position lever bracket. Insure that the
Snatch Block assembly is free of any moving parts and
does not interfere with the normal use of the blade
system.
Attach the Lift Strap (#6) to the top of the brush guard.
Hook the winch hook onto the Lift Strap (#6).
823-230C ST MOUNT KIT-SNOW PLOW W/INST
PLOW MOUNT
1. Attach (#1) Blade Mount to bottom of frame tubes
(Shown above) using the (#5) 5/16" x 2" x 3" U-Bolts for
the rear and the (#4) 3/8" x 1 1/2" x 2 1/2"U-Bolts for the
front.