Filter
Top Products
6
Introduction
SBL2566, SBL2574, & SBL2584 with S/N 891531+ Snow Blowers 370-478M
3/18/15
Table of Contents
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Snow Blower have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. ______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on Warranty page 37. Always provide model
and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new Snow
Blower. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
35599
Right Side
Left Side
Introduction
Land Pride welcomes you to the growing family of new
product owners.
This Snow Blower has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this machine.
Application
Land Pride offers the SBL2566, SBL2574, and SBL2584
Series of residential Snow Blowers ranging from 66" up to
84" in width. They are designed with a skid steer
mounting plate for attaching to skid steers. The SBL2566
can also be attached to a tractor front loader with Land
Pride’s 3-point hydraulic reservoir system (HRS) or
equivalent system mounted on the back. These Snow
Blowers are designed to remove snow from parking lots,
farm yards, feed lots, driveways, walking paths, and
sidewalks in residential and commercial areas.
Land Pride’s unique patent-pending level run indicator
provides the operator with a clear, visible indication that
the Snow Blower is operating level. The auger, impeller,
and chute rotation are powered with individual hydraulic
motors. Adjustable skid shoes mounted on both sides
can be adjusted to carry the Snow Blower above hard
surfaces, loose gravel, and rocks to help increase the life
of the unit.
See “Specifications & Capacities” on page 33 and
“Features & Benefits” on page 34 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com.
Terminology
See Figure 1: “Right” or “Left” as used in this manual is
determined by facing in the direction the machine will
operate while in use unless otherwise stated.
Definitions
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.