Filter
Top Products
13
Section 1: Assembly and Set-Up
9/24/08
RCR1884 Series Rotary Cutters 312-880M
Land Pride
Table of Contents
Front Guard Assembly
Front Rubber Guard Installation
Refer to Figure 1-6:
1. Install center rubber guard (#5) with 3/8” x 1” long
carriage bolts (#4). Secure with 3/8”flange nuts (#3).
2. Install left and right side rubber guards (#2) with 3/8”
x 1” long carriage bolts (#4). Secure with 3/8” flange
nuts (#3).
3. Tighten all 3/8” flange nuts (#2) to 31 ft-lbs as
indicated in the “Torque Values Chart” on page 33.
Front Chain Guard Installation (Optional)
Refer to Figure 1-7:
1. Install center chain guard (#1) with 3/8” x 1” long
carriage bolts (#4). Secure with 3/8”flange nuts (#3).
2. Install left and right chain guards (#2) with 3/8” x 1”
long carriage bolts (#4). Secure with 3/8” flange nuts
(#3).
3. Tighten all 3/8” flange nuts (#2) to 31 ft-lbs as
indicated in the “Torque Values Chart” on page 33.
Front Rubber Guard
Figure 1-6
Front Chain Guard
Figure 1-7
24656
24657