Filter
Top Products
34
Section 6: Specifications & Capacities
AFM4211 All-Flex Mowers 315-507M
11/14/08
Land Pride
Table of Contents
Section 6: Specifications & Capacities
AFM4211 All-Flex Grooming Mowers
Specification / Capacity
Discharge Type Rear
Cutting Width 11’- 1”
Overall Width 11’- 3 1/2”
Transport Height 6’-5”
Transport Width 5’-6” At Mid Cutting Height
Overall Length 10’-11” Transport Position
Machine Weight 2,040 lbs.
Tractor Horsepower Minimum 30 HP and Maximum 65 HP
Hitch Pull Type With Adjustable Clevis and Safety Tow Chain
Tongue Support 2,200 lb. Capacity Screw Jack
Gearbox Support 3/8” Steel Channel
Gearboxes 540 RPM (1)-Splitter Gearbox and (3)-Wing Gearboxes
Main Driveline (1) Category lll Constant Velocity With or Without Slip Clutch
Deck Drivelines (3) Category II With or Without Slip Clutch
Cutting Height 1” to 5 1/2” in 1/2” increments
Deck Size and Quantity 3 each at 48”
Deck Overlap 6”
Deck Thickness 3/16”
Anti-Scalp Roller Front Center and Rear Outside Deck Corners
Blade Drive Belt (1) - B-Section
Drive Belt Tensioning Spring Loaded Idler
Blade Bearings Sealed Ball Bearings
Blades Size and Type
3 Each Per Deck
1/4” x 2 1/2” x 16 7/8” Medium Lift Standard
Optional Blades - Low Lift, High Lift & Mulching
Blade Overlap 1 3/16”
Blade Spindle Speed 3,628 RPM
Blade Tip Speed 16,020 FPM
Deck Tires 10 Each, Air 13” x 5", Sealant With Tapered Roller Bearings
Deck Wheel Spindles 1 1/4” With Nylon Bushings
Transport Tires 2 Each, 18" x 9.5", Sealant With Tapered Roller Bearings
Transport Locks Automatic Transport Locks With Pull Rope Release
Wing Flex 23 Degrees Left To Right
22 Degrees Front To Back
Center Deck Flex 13 Degrees Front To Back
Hydraulic Outlets 1 Set Required
Deck Cylinders Dual Acting
Gauge Wheel Arms 1/4” Wall Square Tubing
Turning Radius Zero Turning Radius
Mowing Capacity @ 2 MPH = 2.68 Acres Per Hour
@ 4 MPH = 5.37 Acres Per Hour
@ 6 MPH = 8.10 Acres Per Hour