Filter
Top Products
27
Section 5: Maintenance and Lubrication
11/14/08
AFM4211 All-Flex Mowers 315-507M
Land Pride
Table of Contents
10435
Step 2
Remove backup ring, lock collar,
compression spring, bottom
backup ring, and balls.
Step 3
Tighten the four hex nuts
uniformly until the clutch pack
and hub are loose.
Step 4
Bend all four retaining lugs outon
edge of clutch housing.
Step 5
Remove thrust plate with
Belleville Springs and lug rings to
access friction discs and hub for
inspection or service.
2-Plate Disassembly
Step 1
Remove snap ring.
Step 6
Inspect friction discs and hub.
10449
Step 2
Compress Belleville Springs to
the pressure plate by tightening
the four hex nuts and then
placing the assembly into the
clutch housing.
Step 3
Bend retaining lugs inward over
the Belleville Spring edges to
secure the spring before backing
the four hex nuts off.
Step 4
With lugs bent in, loosen the four
hex nuts completely to the end of
the threaded studs.
Step 5
Insert greased balls.
Step 6
Install bottom backup ring,
compression spring, lock collar,
and top backup ring.
Step 7
Install snap ring.
Step 1
Place hub and friction discs into
the housing.
2-Plate Assembly