Land Pride 357-131A ZT72 Lawn Mower User Manual


 
3
6/23/08
Manual No. 357-129M
ZT60 & ZT72 Assembly Instructions
Land Pride
ZT60 & ZT72 Assembly Instructions
ZT60 Kit No. 357-130A (S/N 505070-)
ZT72 Kit No. 357-131A (S/N 510757-)
Use the list below that is for your Mulching Baffle Kit as
a checklist to inventory parts received. Please contact
your local Land Pride dealer for any missing hardware.
1. Park mower on a flat surface, place control levers in
park brake position, shut off engine and remove
spark plug wire from spark plug.
2. Remove deck cover and raise front end of mower
enough to allow room to install the baffles.
Refer to Figure 3:
3. Locate pilot holes which have knock-outs in the deck.
Punch-out these holes. Make sure knock-outs are
completely removed.
4. Mount baffles (#2) to the deck with 3/8" flat washers
(#6) and 3/8"-16 hex nuts (#5). Tighten nuts to
20 ft-lbs.
5. Mount baffle (#1) to the deck with 3/8"-16 x 1" GR5
hex head cap screws, 3/8"-16 x 3/4" round head
square neck bolt (#4), 3/8" flat washers (#6) and
3/8" hex whiz nuts (#5). Tighten nuts to 31 ft-lbs.
6. Lower unit and reconnect spark plug wire.
NOTE: Be sure to properly block up mower so it can
not move after it is raised.
ZT60 & ZT72 Mulching Baffle Kit
Figure 3
23790
357-130A ZT60 MULCHING BAFFLE KIT (S/N 505070-)
Your kit includes: (Note: Blades Are Not Included)
1 1 356-034H MULCH BAFFLE WELDMENT
2 2 356-144H MULCH KIT BAFFLE Z72
3 2 802-017C HHCS 3/8-16X1 GR5
4 1 802-149C RHSNB 3/8-16X3/4 GR5
5 7 803-014C NUT HEX 3/8-16 PLT
6 9 804-012C WASHER FLAT 3/8 SAE PLT
1 357-129M MULCHING BAFFLE KIT MANUAL Z MOWER
Item Qty. Part No. Part Description
357-131A ZT72 MULCHING BAFFLE KIT (S/N 510757-)
Your kit includes: (Note: Blades Are Not Included)
1 1 356-034H MULCH BAFFLE WELDMENT
2 2 356-143H BAFFLE, Z60
3 2 802-017C HHCS 3/8-16X1 GR5
4 1 802-149C RHSNB 3/8-16X3/4 GR5
5 7 803-014C NUT HEX 3/8-16 PLT
6 9 804-012C WASHER FLAT 3/8 SAE PLT
1 357-129M MULCHING BAFFLE KIT MANUAL Z MOWER
Item Qty. Part No.Part Description
Mulching Blade Ordering
Information
MowerModel Requires 3 Blades
ZT60 890-702C 20.9" Mulch Blade
ZT72 890-698C 25" Mulch Blade