Filter
Top Products
4
Important Safety Information
FM2060 & FM2072 Flail Mowers 309-100M
3/25/08
Land Pride
Table of Contents
Safety Labels
Your mower comes equipped with all safety labels in
place. They were designed to help you safely operate
your implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
818-130C
Caution: To avoid injury
818-230C
Red Reflector (Both Sides)
818-540C
Danger: Guard Missing
13314
1796217962
17964
4. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
a. Squeeze out air bubbles with the edge of a credit card.