Filter
Top Products
8
V. RADIO-CONTROLLED TIME ON/OFF SETTING
1. “RCC” will appear in the DATE LCD and “ON” or “OFF” will flash in the TIME LCD.
2. Press and release the MIN/MAX/+ or the ALARM/- key to select radio-controlled time on or
off.
3. Press and release the SET button to confirm and advance to the 12/24-hour time setting.
VI. 12 OR 24 HOUR TIME SETTING
1. “12h” or “24h” will flash in the TIME LCD.
2. Press and release the MIN/MAX/+ or the ALARM/- button to select 12 or 24-hour time
format.
Note: When in the 12-hour format “P.M.” will appear to the left of the hour in the time LCD
between the hours of noon and midnight.
3. Press and release the SET button to confirm and advance to the time setting.
VII. TIME SETTING
There are two methods by which the time and date can be set:
A) Automatically via WWVB reception, or
B) Manually.
A. WWVB (Remote Control Time)
This method requires you to do nothing, except wait for the signal to be received, and to select a
time zone. Reception usually takes approximately 10 minutes during optimal conditions. The best
conditions for reception is at night, between midnight and 6:00 am—when there is less atmospheric
interference. To keep your time as accurate as possible, the indoor weather station conducts a
WWVB search every night between these hours, and overrides any manually set time. The WWVB
tower icon (appearing in the TIME LCD) will flash when a signal-search is in progress and a signal
is being received, and will remain steady when the signal has been received. If the WWVB time has
not been received after 15 minutes of battery installation, you may manually set the time or leave the
time function alone (reception will occur regardless).
B. MANUAL TIME SETTING
Note: When in the 12-hour format “P.M.” will appear to the left of the hour in the time LCD
between the hours of noon and midnight.
Note: Reception of the WWVB signal will automatically set the time. The reception of the
signal will override any programmed time.
1. The hours digits will flash in the TIME LCD.
2. Press and release the MIN/MAX/+ button to advance or the ALARM/- key to decrease the
hours.