Filter
Top Products
30
3. Using other electrical products such as headphones or speakers
operating on the same signal frequency (915MHz) may prevent
correct signal transmission and reception.
3. Neighbors using electrical devices operating on the 915MHz
signal frequency can also cause interference.
4. “Visibility” of the intelligent weather station and remote
temperature/humidity sensor (e.g. through a window) increases
the range.
Note:
When the 915MHz signal is received, do not re-open the battery cover
of either the remote temperature/humidity sensor or the intelligent
weather station, as the batteries may spring free from the contacts and
force a false reset. Should this happen accidentally then reset all units
(see Setting up above) otherwise transmission problems may occur.
If no reception is possible despite the observation of these factors, all
system units have to be reset (see Setting up).
POSITIONING THE INTELLIGENT WEATHER STATION:
The intelligent weather station has been designed to be hung on a wall
or free standing.
For Free standing:
Simply attached the stand to the bottom of the unit and
place onto a flat surface.
To wall mount
Choose a sheltered place. Avoid direct rain and sunshine.
Before wall mounting, please check that the outdoor temperature and
humidity values can be received from the desired locations.
To wall mount: