Filter
Top Products
Checking the programmed data
➩ Press the „M“ button twice. The current programming is shown in the
display
y
.
➩ Press the button to switch through the programme.
➩ To leave the Programme-Mode, continue to press the „M“
button until a bar appears over Ꭽ in the display
y
.
The watering computer is once again operating in automatic
mode.
Deleting Programmed Data
➩ Press the „M“ button until a bar is shown over ൿ in the display
y
.
➩ Press the button until the number of the desired programme
blinks in the display
y
➩ Press the button.
The programme is deleted and the programmed time is no longer
shown in the display
y
.
➩ Continue to press the „M“ button until a bar appears over the Ꭽ
in the display
y
.
- 12 -
IB_KH4083_BL1562_EN_LB3+6 02.11.2007 11:04 Uhr Seite 12
.