Filter
Top Products
➩ Select with the „+“ button or the „–“ button the desired weekday.
is shown in the display
y
on the left. Watering does not take place
on the programmed day.
➩ Press once on the button.
In the display
y
is shown. Watering takes place on the program-
med day. The bar shows the programmed weekday.
➩ Confirm your selection with the button.
➩ Select a programme number with the „+“ or „–“ button.
The number of the programme position is shown in the display
y
next
to the symbol.
➩ Confirm your selection with the button.
➩ Set the watering time as described under „Programming the
watering timings“.
➩ Press the „M“-Button until a bar is shown over Ꭽ in the
display
y
.
The watering computer is now in automatic mode and will execute the
configured programs.
- 11 -
IB_KH4083_BL1562_EN_LB3+6 02.11.2007 11:04 Uhr Seite 11