Filter
Top Products
28-1/4” (71.8cm)
2-3/4” (7cm)
3” (7.6cm)
32” (81.3cm) WOOD
BASE/CERAMIC FLOOR RAIL
51-3/8” (130.5cm) WOOD
BASE/CERAMIC FLOOR RAIL
4” (10.2cm)
2-3/8”
(6cm)
24”
(61cm)
36” (91.4cm)
72” (182.9cm)
10-3/4”
(27.3cm)
1-1/8”
(2.9cm)
18-1/4”
(46.4cm)
42”
(106.7cm)
13-1/4”
(33.7cm)
77” (195.6cm) x 47” (119.4cm)
WOOD TOWEL BAR
4”
(10.2cm)
(4” 10.2cm)
2-3/8”
(6cm)
1-1/2” I.P.S. THR’D.
1-1/2” O.D.
2
Kohler Co., Kohler WI U.S.A.
110050-2-AB
2. ROUGHINGĆIN: KĆ700 VINTAGE FREE STANDING BATH WITH FITTINGS
A. ORDERING INFORMATION
Accessories/hardware:
Drain K-7159 required*
Antique faucet K-104 required*
Adjustable legs K-1172 required*
Riser tubes K-128 required*
Brass brackets/end caps K-708 required*
Wood base
Ceramic floor rail
K-705
K-709
required*
required*
Wood towel bar K-707 required*
* Required for configuration illustrated.
B. PRODUCT INFORMATION
Fixture*: basin area top area weight
Bathing
well
44” (111.8cm)
x 24” (61cm)
60” (152.4cm)
x 32” (81.3cm)
485 lbs.
(220kg)
water depth capacity
To
overflow
15” (38.1cm) 82 gals.
(310L)
* Approximate measurements for comparison only.
Included Components:
Cutout template 106594-7
C. INSTALLATION NOTES
R ead the entire installation instruction before beginning
the installation.
NOTICE: The floor must support 2,000 lbs (907kg). This is
the combined weight of the bath, water, and two bathers.
Pre-plan access for moving the bath into the construction
area; the bath is heavy and will not fit easily through door-
ways.
Roughing-In Notes
Fixture dimensions are nominal and conform
to tolerances in ANSI Standard A112.19.1.
No change in measurements if connected with
drain illustrated.