Kohler 6VSG Portable Generator User Manual


 
TP-6843 1/13 Introduction 9
Introduction
This manual provides operation and maintenance
instructions for the DC (direct current) variable speed
model 6VSG generator sets equipped with Kohler VSC
generator set controllers.
This generator set is approved for use in stationary
applications in locations served by a public utility,
photovoltaic cells, wind turbines or any combination of
power sources tied to a battery bank. Have the
generator set installed by an authorized
distributor/dealer or service technician. Refer to
Installation Manual, for installation instructions.
Information in this publication represents data
available at the time of print. Kohler Co. reserves the
right to change this publication and the products
represented without notice and without any obligation
or liability whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow
the Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The equipment service requirements are very
important to safe and efficient operation. Inspect the
parts often and perform required service at the
prescribed intervals. Obtain service from an
authorized service distributor/dealer to keep
equipment in top condition.
Figure 1
Figure 1 6VSG Generator Set
List of Related Literature
Figure 2 identifies related literature available for the
generator sets covered in this manual. Only trained
and qualified personnel should install or service the
generator set.
Figure 2
Figure 2 Related Literature
Literature Type Part Number
Installation Manual, Model 6VSG
Generator Set TP-6842
Service Manual, 6VSG Generator Set TP-6844
Operation Manual, OnCue
®
Software
TP-6796
Operation Manual, SiteTech
Software
TP-6701
Installation Instructions, Programmable
Interface Module (PIM) TT-1584
Parts Catalog, Model 6VSG TP-6845