Filter
Top Products
z Be sure electrical outlets and tools are properly grounded
z Use adequate light for the job at hand.
z Make sure there is plenty ventilation. Never operate the engine of the towing
vehicle in a closed building. The exhaust fumes may cause asphyxiation.
z Before working on this machine, disengage the PTO, shut off the engine,
set the brakes, and remove the ignition keys.
z Be certain all moving parts on attachments have come to a complete
stop before attempting to perform maintenance.
z Never work under equipment unless it is blocked securely.
z Always use personal protection devices such as eye, hand and hearing
protectors, when performing any service or maintenance.
z Frequently check tiller tines. They should be sharp, free of nicks and
cracks and securely fastened.
z Periodically tighten all bolts, nuts, and screws and check that all cotter
pins are properly installed to ensure unit is in safe condition.
z When completing a maintenance or service function, make sure all safety
shields and devices are installed before placing unit in service.
z After servicing, be sure all tools, parts and service equipment are re-
moved from tiller.
z Do not allow debris, grease or oil to build up on any deck or platform.
z Where replacement parts are necessary for periodic maintenance and
servicing, genuine factory replacement parts must be used to restore
your equipment to original specifications.
z The manufacturer will not be responsible for injuries or damages caused
by use of unapproved parts and/or accessories.
z A fire extinguisher and the first aid kit should be kept readily accessible
while performing maintenance on this equipment.
STORAGE SAFETY
z Following operation, or when unhooking the tiller, stop the tractor, set the
brakes, disengage the PTO, shut off the engine and remove the ignition
keys.
z Store the unit in an area away from human activity.
z Do not park equipment where it can be exposed to direct contact to live-
stock for long periods of time. Damage and livestock injury could result.
z Make sure all parked machines are on a hard, level surface and engage
all safety devices.
21