Filter
Top Products
SAFETY PRECAUTIONS
During Maintenance
• Use only genuine Kesmac parts. Parts that are not supplied by Kesmac may not meet Kesmac Engineering
specifications or standards of manufacture.
• The use of parts not approved by Kesmac may result in component failure possibly resulting in an accident and
injury to the operator or bystanders.
• Relieve pressure in hydraulic systems before attempting to carry out any service work. Failure to observe this
precaution may result in serious personal injury.
SAFETY ALERT SYMBOL The warning /safety Decals are prominently displayed
and strategically located on the machine.
Hazards are identified by this symbol, followed by the
Signal words DANGER, WARNING or CAUTION Check regularly that Decals are not missing, and are
easily readable. Do not operate the machine if any of the
decals are damaged or missing.
DANGER
Indicates an immediate situation which if not corrected It is important that the operator is familiar with the Safety
or avoided WILL result in death or serious injury. Decals.
WARNING Do not operate the machine if drugs, alcohol or any
Indicates a potential hazardous situation which COULD medications are being used which can affect alertness
result in death or serious injury. or co-ordination.
Seek professional advice before operating the machine
CAUTION if in doubt about the side affects from any medication being
Indicates a potentially hazardous situation which MAY taken that may put your safety at risk.
result in a minor or moderate injury.
3