Filter
Top Products
English 5
Pressure washer does not build up
the pressure or is vibrating.
Î Dismantle the nozzles, check the
nozzles for damage, rinse the T-Rac-
er with clean water then reinstall the
nozzles.
Illustration
1 Remove the clip.
2 Pull out the high-pressure nozzle.
Rinse the high-pressure nozzle with
clean water, replace if necessary.
3 Insert the nozzle.
4 Re-insert the clip.
You can use the upper wand with any
other Kärcher accessory.
Use a moist cloth and clean the appli-
ance after use.
The appliance is maintenance-free.
In the U.S. or Canada, please call
1-800-537-4129 for warranty issues and
visit www.karcher-help.com for techni-
cal support and product assistance.
Call: 01-800-024-13-13 for help or visit
our website: www.karcher.com.mx
Troubleshooting
Cleaning the high-pressure nozzle
General notes
Tip
Maintenance and care
Care
Maintenance
Customer Support
USA and Canada
Customer Support
Mexico