Filter
Top Products
8
Step 6
Disconnect the high pressure hose from the high pressure
outlet and engage the gun safety lock.
Step 1
Engage gun
safety lock.
1. Disconnect all water connections.
2. Turn on the machine for a few seconds,
until the water which had remained in
the pump exits. Turn off immediately.
3. Do not allow high pressure hose to
become kinked.
SHUTTING DOWN & CLEAN-UP
Step 1
Remove detergent
suction tube from
container and insert
into 1 gallon of fresh
water. Siphon water
at low pressure for
one minute.
Step 2
Turn the switch to off
(O) position and
unplug cord from
outlet.
Step 3
Turn off the water
source.
Step 4
Press trigger to
release water
pressure.
Step 5
Disconnect the garden hose
from the water inlet on the unit.
Step 2
Turn pressure
washer to off (O)
position.
WINTERIZING AND LONG-TERM STORAGE
TAKING A BREAK... five minutes or more
4. Store the machine and accessories in
a room which does not reach freezing
temperatures.
Caution: Failure to follow the above
directions will result in damage to the
pump assembly and accessories.