Filter
Top Products
8
Step 5
Disconnect the high pressure hose
from the high pressure outlet.
1. Disconnect all water connections.
2. Turn on the machine for a few seconds,
until the water which had remained in
the pump exits. Turn off immediately.
3. Do not allow high pressure hose to
become kinked.
SHUTTING DOWN & CLEAN-UP
Step 1
Turn the switch to off (O)
position and unplug cord
from outlet.
Step 2
Turn off the water
source.
Step 3
Press trigger to release
water pressure.
Step 4
Disconnect the garden hose from
the water inlet on the unit.
Step 2
Turn pressure washer
to off (O) position.
WINTERIZING AND LONG-TERM STORAGE
TAKING A BREAK... five minutes or more
4. Store the machine and accessories in
a room which does not reach freezing
temperatures. DO NOT store near
furnance or other sources of heat as it
may dry out the pump seals.
Caution: Failure to follow the above
directions will result in damage to the pump
assembly and accessories.
A
B
A
B
Step 1
Release trigger (A)
and engage gun
safety lock (B).
Step 6
Release trigger (A)
and engage gun
safety lock (B).
I
/
ON
I
/
ON
O
/
OFF
O
/
OFF
I
/
ON
I
/
ON
O
/
OFF
O
/
OFF