Filter
Top Products
6
English
STEP 1:
Attach the handle to the frame of the pressure
washer. Align holes, insert bolts, and tighten with
knobs.
STEP 2:
Mount the gun/hose storage handle.
STEP 3:
Mount the nozzle holder with enclosed nylon
rivets to the handle.
STEP 4:
Place the quick connect nozzles in the nozzle
holder.
STEP 5:
Attach the wand to the spray gun.
Assembling
ASSEMBLY INSTRUCTIONS
STEP 6:
Pull the spring-loaded collar of the wand back to
insert your choice of quick connect nozzle.
STEP 7:
Release the collar and push the nozzle until the
collar clicks.
WARNING
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
Make sure you hear a ‘click’ when inserting ■
the nozzle tip into the wand.
Pull the nozzle to make sure it is seated ■
properly before operating your unit.