Filter
Top Products
29
ENGLISH
CAUTION!
Excessively leaning trees
are under tension and
may split easely, causing
root end to rise up or be
thrown rearwards.
Felling Cut - Trunk Diameter More than
Twice Guide Bar Length.
1. Cut a large, wide notch.
2. Cut a recess into center of notch.
3. Saw around trunk with a pulling chain to complete
felling.
Felling Leaning Trees
IMPORTANT!
Always leave a hinge on both sides of center cut.
1. Make two notches.The tip formed where the notches
meet should point toward the felling direction.
2. Make the felling cut straight from behind, a bit at a
time.
This method will slow the fall of the tree and allow you
to get clear.
NOTCH
NOTCH
FELLING
CUT
FELLING
DIRECTION
Basic Working Techniques