Filter
Top Products
30 – English
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data RS44 RS52
Engine
Cylinder displacement, cu.in/cm
3
2,70/44,3 3,10/50,8
Cylinder bore, inch/mm 1,65/42 1,77/45
Stroke, inch/mm 1,26/32 1,26/32
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 13500 13500
Speed of output shaft, rpm 10500 10500
Max. engine output, acc. to ISO 8893 2,0/9000 2,4/9600
Catalytic converter muffler No No
Ignition system
Manufacturer/type of ignition system EM/ET EM/ET
Spark plug
NGK BPMR 7A/Champion
RCJ 7Y
NGK BPMR 7A/Champion
RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q Walbro HDA
Fuel tank capacity, US pint/litre 1,70/0,8 1,60/0,75
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 18,5/8,4 20,1/9,1
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-1997, dB(A), min/
max:
100/103 98/104
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s
2
At idle, left/right handles, min.: 2,5/2,7 3,4/4,0
At idle, left/right handles, max.: 3,5/3,5 3,4/4,0
At max. speed, left/right handles, min.: 3,3/3,3 1,4/3,0
At max. speed, left/right handles, max.: 4,8/5,4 5,8/7,4
RS44/RS52
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 20 mm Output shaft thread M12
Grass blade/grass cutter
Multi 255-3 (Ø 255 3 teeth) 502 26 34-03
Multi 300-3 (Ø 300 3 teeth) 502 26 34-03
Saw blade
Opti XS 200-22 (Ø 200 22 teeth) 502 27 22-01
Opti XS 225-22 (Ø 225 22 teeth) 502 03 94-05
Plastic blades Polytrim Ø 300 503 91 60-03 / 502 26 34-03
Trimmer head
Trimmy S II 503 91 60-03
Auto 55 503 91 60-03
Support cup
Fixed -
With ball bearing -