Jonsered CS 2147 Chainsaw User Manual


 
2
English
KEY
T
O SYMBOLS
Symbols on the mac
hine:
W
ARNING! Chain saws can be dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others.
Please read the operator’s manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
This product is in accordance with applicable
EC directives.
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specied in chapter Technical data and on
label.
Other symbols/decals on the mac
hine
refer to special certication requirements for certain
markets.
Symbols in the operator’
s manual:
Switch off the engine b
y moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
Refuelling.
Filling with oil and adjusting oil ow.
The chain brake must be engaged when
the chain saw is started.
If your machine bears this symbol it is
equipped with a catalytic converter.
Never let the guide bar tip come in contact
with any object.
WARNING! Kickback may occur when the
nose or tip of the guide bar touches an object,
and cause a lightning fast reverse reaction,
kicking the guide bar up and towards the
operator. May cause serious personal injury.