Filter
Top Products
34 – English
TECHNICAL DATA
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
CC 2145
Engine
Cylinder displacement, cu.in/cm
3
2,75/45
Cylinder bore, inch/mm 1,65/42
Stroke, inch/mm 1,26/32
Idle speed, rpm 2800
Recommended max. speed, rpm 12500
Speed of output shaft, rpm 9000
Max. engine output, acc. to ISO 8893, kW/ rpm 2,0/9000
Catalytic converter muffler No
Speed-regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system SEM AM
Spark plug Champion RCJ 6Y
Electrode gap, inch/mm 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q
Fuel tank capacity, US pint/litre 1,9/0,9
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 18,1/8,2
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-2003, dB(A), min/
max:
100/104
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-2003, m/s
2
At idle, left/right handles, min.: 2,4/2,6
At idle, left/right handles, max.: 2,9/3,2
At max. speed, left/right handles, min.: 2,0/2,3
At max. speed, left/right handles, max.: 2,8/3,5