Filter
Top Products
542937-UUM-A-1010
8 Johnson Controls Unitary Products
SMART RECOVERY
Your Communicating Control comes with a feature called Smart Recovery, which eliminates all
guesswork when setting your program schedule.
How long does it take the furnace to warm your house in the morning before you get out of bed or
how long does it take the air conditioner to cool your house in the afternoon before you return from
work? The Communicating Control determines the equipment start time to satisfy your desired tem-
perature setpoint.
Simply set your program schedule to the time you want the house to be at your comfort tempera-
ture. The Communicating Control then turns on the heating or cooling at just the right time to have
your home reach your comfort temperature at your scheduled time.
For example: you get out of bed at 6:00 AM and want the temperature to be 70°F. Set the Awake
period for 6:00 AM and 70°F. The Communicating Control will turn on the heat before 6:00 AM to
raise the temperature to 70°F by 6:00 AM.
ENERGY SAVER SETTINGS
Energy Saver feature allows you to program your system for maximum energy savings. You can
chose from two, three or four time periods each day, with different settings for each day.
This Communicating Control is preset to use Energy Saver program settings. These settings would
help reduce your heating/cooling expenses.
USING PROGRAM SCHEDULES
In a Non-Programmable mode, adjusting program schedule cannot be done.
Setpoints
Fan Setting
Setpoints
Heat Cool Hum Dehum
Awake (6:00 AM) 70° 78° Auto
Auto Auto
Day (8:00 AM) 62° 85° Auto
Return (5:00 PM) 70° 78° Auto
Sleep (10:00 PM) 62° 82° Auto
In order to edit or run a program schedule, change the View/Mode to either Programmable
or Advanced Programmable (see page 3 for details).
1. Press Menu.
2. Press Schedule icon.
NOTICE
Cancel
Save
Assign to
Calendar
New Viewer
Edit
Copy
Delete
Import/
Export
Schedule
Energy Saver
Schedule 1
Schedule 2
Schedule 3
Create or edit schedules