Filter
Top Products
542937-UUM-A-1010
16 Johnson Controls Unitary Products
Equipment Conditions
Using the system map, you can determine your equipment conditions. The color GREEN means
your equipment is performing as expected without any concerns. YELLOW, that particular piece of
equipment requires some attention but not urgently. When equipment status is highlighted in RED, it
needs immediate attention. Equipment marked in a GRAY color is not installed and is offered to
maximize your comfort and indoor air quality. For more information on equipment highlighted in
GRAY color, contact your installing dealer for more details.
Equipment Operational State
For detailed information on the current operational state of your heating or cooling equipment, you
can refer to the Equipment Status screen. It displays status information about your indoor unit (air
handler or furnace) and your outdoor unit (heat pump or air conditioner) at any given time.
Equipment Service Reminders
This feature displays an alert to remind you to change the air filter, humidifier pad, UV lamps or ser-
vice your electronic air cleaner. To activate, follow these steps.
1. Press Menu.
2. Press Status icon.
Not all equipment information is shown for all systems.
1. Press Menu.
2. Press Settings icon.
3. Press Maintenance icon.
4. Air Filter, select either Cumulative Hours or
Months. Adjust the period per the manufacturer
recommendation.
Touch ICON for a detailed view
Log MenuRefresh Accessories
Exit Service Mode
Humidifier
ON
UV Lamps
ON
EAC
Not Installed
Heat Pump
OFF
Thermostat
ON
Furnace
ON
11:07AM Thu 21 Jul
Back
LogRefresh Accessories
Touch ICON for a detailed view
Status
Humidifier
ON
UV Lamps
ON
EAC
Not Installed
Heat Pump
OFF
Thermostat
ON
Furnace
ON
Log
resh
Accessories
UV L
a
ON
EA
C
Not I
n
Furn
a
O
N
NOTICE
6 Months
Cancel
Air Filter:
Cumulative Hours
Months
15,000 Hours
Humidifier Pad:
Cumulative Hours Months
Settings / Maintenance
OK