Filter
Top Products
7 - PRE-DELIVERY CHECKLIST
To the dealer: Inspect the machine thoroughly after assembly to assure it is functioning
properly before delivering it to the customer. The following checklist is a reminder of points to
cover. Check off each item as it is found satisfactory or after proper adjustment is made.
Gearbox oil level.
Guards and shield properly fastened.
Lubrication of grease fittings.
All hardware properly tightened.
All decals properly located and readable (see fig. 6).
Overall condition (touch up scratches, clean and polish).
Test run, check for excessive vibration or overheating of bearings.
Operator’s Manual.
Review the Operator’s Manual with the customer. Explain the following:
Warranty.
Safe operation and service.
Correct machine installation and operation.
Daily and periodic lubrication, maintenance and inspections.
Troubleshooting.
Operational procedures and storage.
Parts and service.
Fill out the Pre-Delivery Checklist and the on-line Warranty Registration form.
Give customer the Operator’s Manual and encourage the customer to read the manual carefully.
IMPORTANT: The dealer must complete the Warranty Registration, located on the Frontier
website. Warranty claims will be denied if the Warranty Registration has not been completed.
Model Number: __________ Serial Number: __________
Delivery Date: __________ Dealer’s Signature: __________
FERTILIZER SPREADERS OPERATOR’S MANUAL
PRE-DELIVERY CHECKLIST 28 FRONTIER