John Deere SS1023B Spreader User Manual


 
5 - REPAIR PROCEDURES
CAUTION: All repair procedures must be done by authorized dealerships. It is not
recommended that untrained individuals perform any repair work.
5.01 - Suggested Spare Parts
It is suggested that the following spare parts be kept on hand for the spreader at all times to prevent a
minor problem from delaying work:
Models SS1023B, SS1036B & SS2036B
1Nut M30 (5BP501651B)
1Threaded Bushing (5BP501622B)
1Spreader disc (5BP501650B)
QuantityDescription
Models SS1067B & SS2067B
1Stirrer (5BP501597B)
4Spreader disc wings (5BP501598B)
QuantityDescription
5.02 - Storage
After seasonal use it is important to perform the following for prolonged storage:
1. Empty hopper of product before unhooking it from the tractor.
2. Wash and dry the spreader carefully.
3. Inspect the spreader and replace worn or damaged parts. If corrosive material has eaten under
the paint, clean off the area with a wire brush and touch up with primer and paint.
4. Tighten all hardware.
5. Grease or oil all areas indicated under Maintenance
10
.
6. Apply a thick layer of grease to all exposed moving parts.
7. Cover the spreader from the elements in order to have it in perfect condition for the start of the
next season.
8. Make sure all parked machines are on a hard, level surface, and engage all safety devices.
9. Do not permit children to play on or around the stored unit.
Paint, black - aerosol spray can5BP7300010
Paint, green - aerosol spray can5BP7300011
Primer, gray - aerosol spray can5BP7300007
Description
Part #
Touch up paint available:
FERTILIZER SPREADERS OPERATORS MANUAL
REPAIR PROCEDURES 26 FRONTIER
10
See Chapter 4 - Maintenance.