Filter
Top Products
SERVICE LUBRICATION
Service Lubrication - Page 19
C
Greasing and lubricant points
C) Rotor spindle lubricator
D) Reduction unit oil plug
E) Transmission oil fill plug
F) Transmission oil drain plug
G) Transmission oil level plug
H) Hoe blades fixing bolts
Lubricants
• It is advisable to use SAE 85W/140 OIL or equivalent for the reduction unit (or gear box) and side
transmission.
• It is advisable to use GR MU EP 2 GREASE or equivalent for all greasing points.
H
D
G
E
F
POINT OIL QUANTITY: lt (US gal.)
Reduction unit oil (D) 4 (1,04)
Transmission oil fill gears (E) 3,7 (0,96)
Fine pitch screws CLASS
6.6 8.8 10.9 12.9
M8 x 1 15 (11) 26 (19) 36 (26.5) 44 (32.5)
M10 x 1.25 30 (22) 52 (38) 74 (54) 88 (65)
M12 x 1.25 51 (37.5) 91 (67) 127 (94) 153 (113)
M14 x 1.5 81 (60) 143 (105) 201 (148) 241 (178)
M16 x 1.5 120 (88) 214 (158) 301 (222) 361 (266)
M18 x 1.5 173 (127) 308 (227) 433 (319) 520 (384)
M20 x 1.5 242 (178) 431 (318) 606 (447) 727 (536)
M22 x 1.5 321 (237) 571 (421) 803 (592) 964 (711)
M24 x 2 411 (303) 731 (539) 1028 (758) 1234 (910)
M27 x 2 601 (443) 1070 (790) 1504 (1110) 1806 (1333)
M30 x 2 832 (614) 1480 (1090) 2081 (1535) 2498 (1843)
Bolts tightening torques - settings given in Nm (lb-ft)
➤