John Deere RT 1308 WR Tiller User Manual


 
SERVICE
Service - Page 20
Replacing tines
CAUTION: To prevent injuri: Wear heavy gloves when replacing tines.
To get the best performance from your tiller:
• Replace badly bent, worn, or broken tines immediatly.
• Replace worn or broken hardware (see your Frontier dealer for correct hardware).
• MAKE SURE to replace tines on ONE spindle at time to keep spiral tine pattern.
• Tine cutting edge MUST BE facing forward in direction of tine rotation.
CAUTION: Make sure you block tiller before doing any service on the tiller.
• STOP engine. • LOCK park brake. • FIRMLY block tiller on horizontal surface.
Tines can be changed with the tiller mounted on tractor. Make sure you block the tiller before doing any
service on the tiller.
Front
Rear
A
B
Tines
Before replacing tines make sure the tiller is firmly
blocked.
The tines with which the rotary tiller is equipped can work
soils of normal conformation. Check the degree of wear
and condition of the tines each day. If the blades should
accidentally bend (or break) during work, they must be
immediately replaced.
First - Identify tines:
Remember to mount the new tine in exactly the same
position as the old one (A). If several tines must be
replaced, it is advisable to remove and assemble one tine
at a time in order to prevent positioning errors.
The tillers are normally equipped with 4 blades per flange.
Second - Install New Tines:
1. Raise tiller with a safe lifting device.
1. Put safety stands or blocks under tiller.
3. Stand facing rear of tiller and study placement of tines.
4. Remove four bolts, lock washers, and nuts (C).
C