Filter
Top Products
2. Lower leveling board to top of ground (C):
• Tilled soil (D) will be fi ne and level.
• Tractor speed will determine size of clods (E).
3. Raise leveling board (C):
• Tilled soil (D) will be coarse and rough.
• Tractor speed will determine size of clods (E).
CAUTION: Before you work around hitch:
• STOP engine.
• LOCK park brake.
• FIRMLY block tiller on horizontal surface.
Adjustable offset
The tiller unit can be shifted sideways in relation to the
three-point hitch. This makes the implement extremely
versatile during the various working conditions.
Use of the hexagonal drive shaft allows the tiller unit to
quickly slide, thus notably simplifyng the operation.
The following operations must be carried out:
RT 1142 - 1149
1. Thorougly clean the frame and relative guides to allow
the parts to work smoothly.
2. Loosen the bolts (A) that fi x the bracket and leave
these free.
3. Move the carriage to the position required and the
tighten the two carriage fi xing bolts.
RT 1157 - 1165
1. Thorougly clean the frame and relative guides to allow
the parts to work smoothly.
2. Loosen the bolts (B) that fi x the bracket and leave
these free.
3. Move the carriage to the position required and the
tighten the two carriage fi xing bolts.
OPERATING
Operating - Page 19
D
C
E
D
E
C
A
B
RT 1142 - 1149
RT 1157 - 1165