Filter
Top Products
Removing - 14
REMOVING
Removing
Removing Snowblower
NOTE: Store all hair cotter pins and clevis pins in
snowblower assembly for storage.
1. Park machine safely. (See Parking Safely in the Safety
Section).
2. Loosen chute control support bolt (A) then remove chute
control support and chute control rod (B) as one assembly.
3. Raise snowblower and remove lift assist spring (C)
along with chain and toggle (D) from each side of unit.
4. Lower snowblower and remove lift handle (E).
5. Disconnect clutch link rod (F) from tractor attachment
engagement lever.
6. Remove upper V-belt from engine drive pulley (G).
7. Use lift handle to relieve weight from clevis pins (H) and
remove hair cotter pins and clevis pins from front mounting
brackets. Lower upper mounting frame to ground.
cCAUTION: Avoid injury! Attachment is heavy.
Keep hands and feet out from under attachment
when removing or installing.
B
A
C
D
E
F
G
H