Filter
Top Products
Operating - 24
OPERATING
Unplugging Mower or Optional Bagger
Before getting off the seat:
1. Stop machine.
2. Disengage mower blades.
3. Move throttle lever to slow position.
4. Lower mower to the ground.
5. Lock the park brake.
6. Stop the engine.
7. Remove the key.
8. Wait for all moving parts to stop.
Transporting Machine on Trailer
Be sure trailer has all the necessary lights and signs
required by law.
1. Park trailer on level surface.
2. Drive machine onto heavy-duty trailer.
3. Lower mower to trailer deck.
4. Lock park brake.
5. Turn off machine and remove key.
6. Fasten lawn tractor to trailer with heavy-duty straps,
chains, or cables. Both front and rear straps must be
directed down and outward from tractor.
7. Strap down hood.
Using Mulch Cover
Side Discharge
1. Disconnect hooks from slot and/or wheel brackets and
remove mulch cover when side discharge is preferred.
2. Make sure the correct blades are installed for maximum
side discharge operation.
Mulching
MX10441
Picture Note: 48 (3 in 1) used for illustration.
1. Raise discharge chute (A) and metal deflector (B).
c CAUTION: Avoid injury! Rotating blades are
dangerous:
• Park the machine safely and lock the park
brake before getting off the seat.
• Turn the mower off.
• Stop the engine.
c CAUTION: Avoid injury! Use extra care when
loading or unloading the machine onto a trailer
or truck.
• Park trailer on a level surface.
• Use of a trailer with sides is recommended.
• Keep wheels away from drop-offs and
edges.
• Back slowly and in a straight line.
IMPORTANT: Avoid damage! Transmission damage
may occur if the machine is towed or moved
incorrectly:
• Move unit by hand only.
• Do not use another vehicle to move unit.
• Do not tow unit.
c CAUTION: Avoid injury! Rotating blades are
dangerous. Before adjusting or servicing
mower:
• Disconnect spark plug wire(s) to prevent
engine from starting accidently.
• Always wear gloves when handling mower
blades or working near blades.
A
B