Filter
Top Products
Service Lubrication - 23
SERVICE LUBRICATION
Service L ubrication
Grease
TS1417
Use grease based on expected air temperature range
during service interval.
Preferred greases:
• John Deere Moly High Temperature EP Grease.
• John Deere High Temperature EP Grease.
• John Deere GREASE-GARD™
Other greases may be used are:
• SAE Multipurpose EP Grease with 3 to 5 percent
molybdenum disulfide.
• SAE Multipurpose EP Grease.
• Greases meeting Military Specification MIL-G-10924C
may be used as arctic grease.
Lubricating Mower Spindles
M88572
Lubricate three mower spindles grease fittings (A) with
multipurpose grease or an equivalent.
Lubricating Front Wheel Spindles, Wheel
Bearings and Front Axle Pivot
M88584
Lubricate front wheel spindles (A), wheel bearings (B), one
on each side of machine, and front axle pivot (C) with one
or two shots of multipurpose grease or an equivalent.
M92886
Turn wheels to distribute grease to spindles.
122°F
104°F
86°F
68°F
50°F
32°F
14°F
- 4°F
- 22°F
- 40°F
- 67°F
40°C
30°C
50°C
20°C
10°C
0°C
- 10°C
- 20°C
- 30°C
- 40°C
- 55°C
JD Moly High Temp
JD High Temp
GREASE-
BIO-GREASE-
Arctic
NGLI Number
NGLI Number
NGLI Number
A
A
A
B
C