Filter
Top Products
9. Checking to see if front weights to be added to the tractor in order to maintain
balance.
10.Checking the tractor tires for the proper pressure in accordance with the tractor
operator’s manual.
11.Checking that the PTO shield, belt shields and all other shielding are on the
machine and securely in place.
12.Making sure the proper attire is worn. Avoiding loose fitting clothing which can
become entangled. Wearing sturdy, tough-soled work shoes and protective
equipment for eyes, hands, ears and head. Never operate tractor or implements in
bare feet, sandals or sneakers.
13.Checking area for stones, branches and other debris that might be thrown.
14.Ensuring proper lighting is available, sunlight or good artificial lighting.
15.Checking to ensure the safety chain is properly installed.
16.Safety lighting is visible and is working properly.
3.11 - Working Speed
The mowing speed depends on ground conditions, tractor HP, mowing height and grass
thickness. Only a test run will enable you to gauge the optimal working speed for your
conditions.
Under most conditions a 4 to 7 mph ground speed is best. As a rule of thumb and if the
conditions permit, grass dispersion is increased by higher ground speeds.
In order to obtain the best cut possible, always keep the tractor to 540 rpm. When
increasing or decreasing mowing ground speed, always use gear selection, not engine
speed. This will maintain the constant maximum blade speed necessary for a clean cut.
OPERATION 27 FRONTIER
F
LEX WING GROOMING MOWERS OPERATOR’S MANUAL
Fig. 14
The mulching kit is an available
option, consisting in 3
multilevel cutting edge blades
and add-on containment
baffling which bolts to the
underside of the mower deck,
to mulch and pulverize grass
and leaves.